Setup for the Canon Pixma MG2522 - Connect the printer to your wireless network

Welcome to affordable home printing with the Canon Pixma MG2522. It is a multifunction colour inkjet printer that can scan and copy your documents in a snap with high accuracy. For all of your printing needs, the Canon MG2522 is an easy-to-use printer that makes it simple to print your pages with XL ink cartridges that need to be changed less frequently. Overall, Canon Pixma Mg2522 Setup gets you ready for a low-cost home printing setup that works with both Windows and Mac OS X. There is no screen and only a few buttons to let you connect the Pixma MG2522 All-in-One inkjet printer, scanner, and copier to your WiFi network.

How should my Canon Pixma MG2522 printer be setup?

There are several methods to connect your router and computer to the Canon Pixma MG2522 printer, including WiFi and USB. The Canon Pixma MG2522 works with both Windows and Mac OS, which only permit a direct USB connection. Here, we'll guide you through some brief, easy-to-follow instructions for Canon Pixma Mg2522 Wireless Setup, including unpacking and configuration guidance.

• The first setup includes unpacking the MG2522 printer, configuring the settings, and installing the ink cartridges.

• The seal of the MG2522 printer has to be checked, and if it is not properly sealed, it needs to be sent back to the manufacturer immediately away.

• Instead, take the printer out of its box and place it for the remainder of the connection, setup, and installation processes on a flat, sturdy surface.

• The Canon Pixma MG2520 printer must then be plugged into a working wall socket and linked to the power source using its power wire. To begin the Canon Pixma MG2522 Setup procedure, switch on the MG2520 printer by hitting the power button.

• You may then select your favourite country, language, day of the week, and hour. Save the settings after setting them up as best you can.

• When the carriage slot has reached one end, pull the access door for the ink cartridges. Next, open the brand-new Canon Pixma MG2522 ink cartridges and insert them into the corresponding slots.

• You must print a test page on the printer to make sure it is working correctly after finishing the aforementioned configuration.

Steps Canon Pixma MG2522 Wireless setup

• The Canon Pixma MG2522 printer must first be connected to a wall outlet. Use the USB cable to connect the printer's USB port on one end and a wall outlet on the other to complete the Canon Pixma MG2522 Setup.

• Start the Pixma printer after that. Tap it to choose Wifi connect.

• Canon Pixma MG2522 printer is currently searching for networks.

• When the list of available networks shows, select the one you want, then enter the password to connect.

• The Canon Pixma MG2522 Setup is complete at this point, and the printer is now successfully connected to a Wi-Fi network.

Do not hesitate to share the offered information with others who might benefit if this blog article on how to set up a Canon Pixma mg2522 printer was useful to you and prepared you by making the installation of the printer's drivers and efficient printing settings easier. If you have any issues, try contacting the Canon iJ setup team for support.

References: Canon Printer Mg2522 Wireless Setup